ResinWash

cults3d

This is a resin wash machine for clean uv resin prints List of parts you would need. 1- Container 5x5'' size 8- Magnets 10mm 1- 120 mm case fan with the propellers cut 1- Potentiometer 1 turn 10k 1- Resistance 470 ohms 1- MOSFET canal N 50N06 1- Bearing 608zz 1- Female Panel Mounting Connector 1- 12v power adapter Building instruction -Apply glue to the top of the fan and attach the fan cap -Place 4 magnets on the Magnets holder facing up and 4 magnets on the Impeller in the same way, question that both parts repel each other, attach the magnets holder to the fan cap with a screw. -Wire parts using included diagram -Attached your wired parts to your printed Main parts. -Attach oiled 608zz to the Impeller to the bottom of your Impeller basket Always start the fan slowly when starting This parts are remixed from https://www.thingiverse.com/thing:4130767 -Impellering -Fan Cap -Magnets holder -Impellering_Top MOSFET canal N 50N06https://www.amazon.com/-/es/10pcs-FQP50N06-50N06-MOSFET-Original/dp/B07NTZXJDD/ref=sr_1_2?__mk_es_US=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=MOSFET+N+50N06&qid=1590587558&sr=8-2 Bearing 608zzhttps://www.amazon.com/-/es/Shielded-Skateboard-Bearings-Longboard-Scooters/dp/B07DZDLB3N/ref=sr_1_3?__mk_es_US=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=608zz+bearing&qid=1590587623&sr=8-3 Print Settings Rafts: No Supports: No