Resin Support Bin with Brush Top

thingiverse

INSTRUCTIONS BRUSH - Must be printed in FDM. - The brush file should be printed with its back side down. This orientation is already built into the file. - Verify the layerview and confirm that the grass will actually print and supports are not being created between the grass strands. - After printing, carefully cut the grass from the thin wall end. Then cut the thin wall from the rest of the print to reveal the brush. BIN - Simply print it. Things Story I have limited space in which to work with my resin printer and I'm not fond of making a mess while removing supports. Mostly, I use my resin printer to remove supports when the model is still wet with IPA. This makes the tiny bits of support easily stick to my gloves or the model. With this design, you can toss supports into the bin and any tiny bits that want to cling to your gloves or side cutters can be brushed off with Superbeasti's 3d printable grass. *Dont Print with Supports* However, if you still want to print with supports, set it to 'Support touching buildplate only'. Otherwise, the grass will print as a brick...