Reptile S1100 Harrier Detachable Motor Mounts

thingiverse

These detachable motor mounts are designed for the Reptile S1100 Harrier flying wing, configured for twin motors. UPDATE: 16x19 mounting pattern STLs have been added, and the original STLs have been renamed to 16x16. The mounts are oriented to accommodate SunnySky motors, with the cable positioned at the bottom to fit snugly in the recess. Other motors may require a different configuration; contact me for specific patterns. Inspired by StuntDouble's mounts but designed from scratch, these detachable motor mounts do not require foam removal from the rear of each nacelle, unlike their counterparts. Although they weigh slightly more, they provide a full-coverage bond between the backplate and the foam of the nacelle. Installation requires 6 x 5.5mm / M3 hex nylocs for the rear of the backplates and M3 bolts for both the motors and motor mounting plates themselves. Twelve millimeter bolts should suffice. The mounts feature a 16x16 mounting pattern, suitable for most multirotor motors. If demand is high enough, I may create a 16x19 version to accommodate other motors; my build utilized T-Motor F80 Pro 2200kv motors. To assemble the mounts, use contact adhesive like UHU Por to bond the backplates to the nacelles. Ensure that you install the nylocs first. Lastly, print two Recess Plates and bond them to the foam in the middle – this part is optional since it won't be visible once the motors are bolted on.