Reptibreeze (XL) stand/bracket for Ikea Lack 55x55 table

thingiverse

When I upgraded my chameleon's enclosure to a Reptibreeze XL (61x61x122cm), I discovered a challenge. I have an Ikea Lack 55x55cm side table on which it sits, and this proved to be too small: the frame sat over the table instead of resting upon it. This item can be screwed into the table multiple times when printed, providing the capability for the Reptibreeze frame to sit above all sides, transferring weight down through the table. No doubt this could be utilized or remixed for supporting numerous other items in different situations as well. But if you need an Reptibreeze XL on an Ikea Lack table like me, look here. I initially had only one screw hole (as shown in some pictures), but I added a second screw hole for enhanced strength. These files are the two versions with the new screw holes, and I've included OpenSCAD files to facilitate any necessary modifications. Usage Instructions: Print as many variations of each as you need, using recessed screw holes to secure them down into the tabletop. To boost stability, simply print additional ones. I've utilized 3 at the front and back, and 4 along both sides - plenty strong even for an extremely heavily loaded enclosure. For optimal strength, recommend at least 2 per side, placed close to the corners. There are two available designs: one with an edge and one without an edge. I employ the edge design around the sides and back, preventing the Reptibreeze enclosure from sliding or being pushed off, while using the one without edges in front so the lower door will open without any obstacles. Printing Options: I believe best printing results are achieved by printing in black to match the Reptibreeze or matching your Ikea Lack table. I have printed mine in black PLA on a Printrbot Simple Metal, but see no reason why ABS wouldn't work equally well. Choose reasonably dense infill settings - 40% worked for me.