
Reprap Fisher Hall Sensor Bracket
thingiverse
A bracket for the RepRap Fisher enables the use of a NJK-5002C Hall sensor instead of homing microswitches. The Hall sensor is available from Banggood: http://www.banggood.com/NJK-5002C-Hall-Sensor-Proximity-Switch-NPN-3-wires-Normally-Open-Type-p-936554.html. Designed in Onshape, the CAD model can be found at https://cad.onshape.com/documents/43651e2c2ccc40319dedcd6e/w/4b43a6d1793a478896207684/e/8a68f2ddec6540609d254ef4. Print Settings Printer: RepRap Fisher Resolution: 0.2mm Infill: 40% Post-Printing The brown wire connects to 5V (preferably) or 12-19V input. Blue and black wires are connected to X, Y, and Z sensor inputs; blue is sense and black is ground. The sensor operates as an open collector, pulling the signal down to ground when triggered. Configure endstop settings in the Duet as follows: M574 X2 Y2 Z2 S0; Set endstop configuration (all endstops at high end, active high).
With this file you will be able to print Reprap Fisher Hall Sensor Bracket with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Reprap Fisher Hall Sensor Bracket.