Reprap - AtomX Micro Bot

thingiverse

Added 2016-05-13 ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// If you ask in comments or message me, be patient as I started a new nightshift work that makes me pretty tired. Only so you know....... Update 2016-05-08 ( Nr 7 ) Uploaded repetier beta firmware to be used. This works with their browser-based easy-to-use configuration tool. I use the same sockets to power the board to power the fan that cools the hotend, so it's foolproof to avoid clogged nozzles because you might forget. https://www.repetier.com/ Always be careful when using beta firmware like this!!!! Update 2016-04-17 ( Nr 6 ) Uploaded the last part, and now it's final; there will simply be upgrades and fine adjustments to parts only. The part is a z-carriage extender and spacer. Update 2016-04-16 ( Nr 5 ) Uploaded a print cooler and my minimalistic addon to stiffen the z-base a bit with longer threaded rods. Update 2016-04-10 ( Nr 4 ) Uploaded new endstop holder designs. Update 2016-04-07 ( Nr 3 ) Uploaded images so the ramps and LCD mount are more clear to put together. Update 2016-03-28 ( Nr 2 ) Started uploading revision parts on things I've been reported and requested. The x-carriage has been changed, so you now need 47-50mm long M3 screws to attach the motor. The original was done so that you needed to use a Dremel to cut small bits off to fit the motor; it was done like that to make it easier to print. Rev2 parts do not need this anymore!!! If you already printed the old x-carriage and don't want to cut it, there's a motor spacer if you don't want to print the new one and waste plastic. Also made a small revision on the Bowden mount as some builders thought they needed to sand and grind too much to fit their Bowden. I lowered the thickness in this area by 0.25mm, so it should work better. Removed old x-carriage as it's obsolete and better with the new thicker one. It doesn't impact the suggested print size on y as we now have a 200mm long rod on y as default. Keep suggestions coming but please post them here so it's easier for me to track ;) Temporary BOM on the RepRap wiki; I'm working on it and not final. It will be put here also when it's more final and closer to being finished. Pre-assembly...https://youtu.be/bEwji7QfVgc Beta assembly guide part 1..https://youtu.be/EeeoEcFTKqA Beta assembly guide part 2..https://youtu.be/urjjlJxU6iw It's alive....https://youtu.be/iiAD7D7nIw4 BOM will be added during a longer time :). This is an early beta access. http://reprap.org/wiki/AtomX Print Settings Printer: Duplicator 4-5 Rafts: No Supports: No Resolution: 0.2 Infill: 13-20% How I Designed This Tinkercad during a weekend for fun. Inspired by MakerBot Cupcake.