Replacement Tap Handle - Th3 B^ck-Up

pinshape

Replacement Tap Handle for When You're in a Jam - The Back-Up. Printed on an Ultimaker 2 Extended +, Sliced with Cura Slicing Software. Update: January 12, 2018 - Model Now Solid (No Multiple Shells). Print Settings: No Supports / Print Bed Adhesion TAP HANDLE: Standard Fast Print: 60mm/s - Top/Bottom Speed: 30mm/s - Travel Speed: 150mm/s - Initial Layer Speed: 30mm/s In-Fill Density: 35% In-Fill Pattern: Grid (play around with the in-fill densities! I chose to print a 35% in-fill for two reasons: 1) Time constraints. 2) The washers in the tap were still good and it didn't require much force to turn the water off. A denser in-fill should give you a stronger print.) Build Plate Temp: 60Deg/C | Printed in ColorFabb PLA/PLH @212Deg/C | 0.4mm Nozzle HOT/COLD CAPS: I recommend printing the Hot and Cold Caps with a 0.25mm Nozzle at a suitable speed for that nozzle. Boolean Operations Were Employed in the Creation of This Model. Please Remember Material Shrinkage Will Vary Depending on Material, Brand, and Color. If You Like Any of My Designs, Please Show Your Support by Sharing Them with Your Followers on Twitter #3DPrinting and Uploading Pictures of Your Prints. Happy Printing!