Replacement frame WLtoys JJRC 1000 + passing motors 8 mm

thingiverse

The JJRC 1000a frame was crafted for motors with diameters ranging from 7 to 8 mm. This drone supports a wide array of batteries, including the lipos that measure 1s and offer either 300 or 500mAh capacity. The frame features a coreless design found at this link: http://bit.do/Coreless-Chaoli-8-5x20. For printing purposes, we are using the following settings: The brand of printer used for this build is Ultimaker. This project specifically utilized the Ultimaker Original model. Rafts were not employed during this process. The use of supports was necessary. The resolution of the prints came out to be 0.020. Notes were taken: The original design called for ABS as a material, which comes straight from the Ultimaker. Print Head: The temperature for this stage stood at 250 degrees. T ° rugs: The base layers had an even and comfortable temperature of 100 degrees. Print Speed: The speed was quite high, clocking in at 50mm per second. Brim Size: A brim thickness of twenty layers was maintained. Extrusion Multiplier: Throughout the build process, we used a setting of 107%.