Repeating Pistol Crossbow Colt 1911 Government Issue style

grabcad

This 3D printable model was inspired by the video linked below on the JoergSprave youtube channel. A total of 5+1 bolts including hunting bolts can be loaded into the magazine. The lower part of the model was made with scaled images of the 1911 Government style pistol. It is 21 mm longer than the original pistol, and it is held together with 9 screws and some dovetail joints. The link below will give you a pretty good idea of how it is put together and also how the trigger system works. https://youtu.be/cZjtz_R-h-M?feature=shared Some of the components are cut in half to minimize overhang problems when printing. Most angles are 45 degrees or less; however, some support will be required to print the interior of the handle. Any printing flaws will be internal and hopefully can be smoothed out. It should be mentioned that the cocking slide is split into three components and will have to be glued together, this was again done to eliminate printing overhangs. WARNING: I am not responsible for any use or misuse of this model. ALSO: I don’t have a printer anymore so I could not check for clearance problems. If you print it please let me know if there are corrections necessary.