Renault Kadjar led lighting for armrest and cup holder compartments

thingiverse

New: Added Support for Standard 3mm Round LEDs. Guides Help Drilling the Can Holder and Armrest Compartment of Renault Kadjar to Insert LEDs for Night Lighting. The Two Guides Are Designed to Make Precision Holes for Inserting LEDs. They Work Well with Common 3mm Round LEDs. I Recommend Using the Guides to Drill Holes with a 1.5mm Iron Drill Bit and Then Enlarging Them with a 3mm Drill Bit. I Used 3mm White Cylindrical LEDs, and I Also Made Two Supports to Hold Them in Place, as Shown in the Pictures. Two Versions Are Available: One for Standard Round 3mm LEDs and Another for Non-Common 3mm Cylindrical LEDs. A Total of Four LEDs Are Needed: Two for the Can Compartment and Two for the Cockpit Under the Armrest. I Connected Them in Pairs, and Fed a 330 Ohm Resistor to Each Pair. The Power Supply Was Derived from the Handbrake Switch, Connecting the Positive to the Pink Wire with White Stripes and the Negative to the Dark Gray Wire with White Stripes (See Pictures). The LEDs Light Up When the Vehicle Lights Are On (Position or Dipped Beam).