Remote Control Mount for Table or Wall
prusaprinters
<p><strong>This will requite a flat surface on the remote to attach.</strong> </p><p>Uses double sided tape to attach to remote and can use double sided tape or a flat head wood screw to attach to a table or wall. The tape inset is sized at a depth of .75mm for thicker tape such as Scotch VHB, if using a thinner tape just use a negative offset to place the model into the build platform to cut off excess depth so that your tape will stick out past the inset. Sized for ¾" tape but I have included a ½" sized version for attaching to remotes with a smaller flat surface area. The interfacing mounting parts are sized the same so all styles/sizes will interface.</p><h4> </h4><h4>Print settings</h4><p><strong>This model has bridging.</strong> I haven't required any supports but results may vary, if you're unsure of your printers bridging capabilities keep an eye on it for the first little bit and make sure that the 4th layer (.25 layer height) bridges successfully.</p><p>Printed with a .6 nozzle and a .25 layer height. Should print fine with a .4 or a .8, recommended printing with a .25 or .2 layer height.</p>
With this file you will be able to print Remote Control Mount for Table or Wall with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Remote Control Mount for Table or Wall.