Remixes of MyMakibox E3D v6 mounts

youmagine

Work in progress: Collection of remixes of the E3D v6 mount designed by MyMakibox for the Makibox 3D printer. Files are pretty much done but haven't been organized and properly labeled. The ones labeled 4.3 were the first ones I tried that did a pretty good job but still a bit too much play. Modified from https://www.youmagine.com/designs/mymaki-hotend-mount-for-e3d-v6-on-makibox as the parametric one was not available yet. The ".scad" files are the ones I used to tweak and fine tune settings to print on my Prusa i3. Ori should be as it is available from http://www.thingiverse.com/thing:449018 but I found lots of problems with measurements, which led me to change a lot of it in the other ".scad" file. From memory, hole distance was changed so that it would slice in a way that would allow it to print with proper 2-layer perimeters and not have odd gaps here and there. I did change total thickness settings so that I could use it with a J-head, but if you change that back to the default for E3D, it should work fine. Split size had to be reduced or it would take way too much out of the mount and cause channels to be too shallow. This may have been fixed in the latest version on thingiverse. I have included the ".stl" files for the variations I printed for the J-head but I don't remember exactly what tweaks were made in each. v2.2 works from memory. The z-extenders I used have also been uploaded and were originally designed by someone going by the name "makibox" or something very similar on the Makibox users' Google Plus community, but was never uploaded anywhere besides a Dropbox link. The blend file has modified the original so you can tweak the height to exact lengths easily and added a notch to allow it to fit properly as some of the original piece's plastics interfere there.