Remixed cog for brass prep station thing 4739172 by msgbean
thingiverse
This is a replacement brass prep station cog to allow you to use a 6mm shaft coupling Requires four 5mm pan head M3 screws and nuts. If you use longer screws, it will interfere with the panel above. The screws should be flush with the nuts. Re-mixed in Tinkercad - if you want to tinker with it - https://www.tinkercad.com/things/8B6fSrvqlDH I had to print this at 103% (X,Y axis only) - YMMV. You will also have to ream out the 6mm hole to 10 or 11 mm in the part which covers the gears - Mid_plate.stl. You can do this by re-mixing that STL - or just drill it out. The shaft coupling I purchased was: https://www.ebay.co.uk/itm/284103133573
With this file you will be able to print Remixed cog for brass prep station thing 4739172 by msgbean with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Remixed cog for brass prep station thing 4739172 by msgbean.