Remix of Mars Exploration Rover (Opportunity and Spirit)
thingiverse
I reassembled all components, ensuring they are now flat in Cura and ready for printing. Feel free to share any suggestions; I'll address them promptly. Additionally, I corrected non-manifold issues with the tires. To produce the original design, you will need to print one from all parts, except the following: 6x tires, inner wheel, outer wheel, and wheel center 2x strut pin 1 and strut pin 2 3x arm knob You can also modify colors at specific heights: Solar panels at 1 and 5.2mm Camera array at 6.6mm Small camera at 5.6mm Top mast at 104.6mm Small antenna at 10mm Large antenna at 47 and 133.4mm Sun dial at 1.4mm High gain antenna at 0.6mm All parts require support, except the solar panels.
With this file you will be able to print Remix of Mars Exploration Rover (Opportunity and Spirit) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Remix of Mars Exploration Rover (Opportunity and Spirit).