Remix Hero Me/Simplify for E3D V6 Ender 5/Plus

thingiverse

This is a remix of Hero Me https://www.thingiverse.com/thing:3370065 meshed with Simplify https://www.thingiverse.com/thing:3682669 because the Hero Me does not work correctly for the Ender 5. I have resolved that issue as I have been printing successfully with it. Attached: Mount Hero Base 2 Remix_Simplify V2.3 V6_mount_clamp_remix_HERO w BLT V2.4 Remixed Light Weight Dual Metatronics 5015 1 side V1.1 Hardware needed: M3 Nuts x 2 M3x12 x2 M3x35 x2 M3x6 x4 1. Install the M3 nuts into the counter-sunk part of the "V6_mount_clamp_remix_HERO w BLT" or use it with the BLT option. If using BLT, install the BLT first and then mount to the plate. The existing M3 screws that came with the BLT are suitable for this purpose, which are believed to be M3x4. 2. Attach the "V6_mount_clamp_remix_HERO w BLT" to the plate X axis using two M3x12 screws. 3. The main piece, "Mount Hero Base 2 Remix_Simplify", will be secured with M3x35 bolts. Note that 35mm might be slightly too long, so consider cutting it to 32-33mm for a better fit. I plan to update this design in the future to perfectly align with 35mm screws. 4. Attach your preferred fan attachment found in https://www.thingiverse.com/thing:3370065. Also attached is a remix of light weight 5015 fan adapters, enabling the use of the slightly thicker Mechatronics 5015 fan frame. EDIT: 5/11/2020 I have updated this design to work seamlessly with the stock Ender 5. The button cap screws that were previously obstructing the wheels are now corrected and no longer an issue. I have revised the designs accordingly: "V6_mount_clamp_remix_HERO w BL Touch V2.5" "Mount Hero Base 2 Remix_Simplify V2.4"