Remix CR10(S) Upgrade to PRO by 3Deddy for Creality Melzi V2.1

thingiverse

Modified 3Deddy's Low Voltage Box to work with my CR-10S Melzi V2.1 board successfully. The Melzi V2.1 board features seven holes, but I only added one extra post, resulting in six supported posts and one unsupported hole located next to the X stepper motor. One of the posts was partially merged into the wall due to its proximity. On April 22, 2020, I made changes to the Low Voltage Creality V2.1 Melzi-V2.stl file: Lowered the standoffs slightly for better alignment with USB and SD card openings, significantly improving SD card alignment. The USB port now clears the top edge by a small margin; however, it might require a minor modification to the top opening. Made slight adjustments to most mainboard standoff positions, shifting them by a quarter to half mm. On April 21, 2020, I modified the Low Voltage Creality V2.1 Melzi.stl design: Added a standoff for the hole next to the power connector. Moved other standoffs to match the V2.1 board configuration.