REMIX: 19 inch rack monitor mount (halved and quartered for smaller printers)

thingiverse

DISCLAIMER: These haven't been tested by me personally (or anyone else... if there's any new info, it'll be in the comments). Let me know if they work for you! These are just some parts I made based on [jrucker2004's](https://www.thingiverse.com/jrucker2004) design for a [19-inch rack monitor mount](https://www.thingiverse.com/thing:4099218). His mount won't fit on smaller printers, so I decided to brush up on my CAD skills by chopping up his model into smaller pieces. What to print: - If you're printing the halved pieces, print 2 of the same half. For additional support (probably not necessary), print 2 of the _opposing_ axis' support brackets (e.g. 2x monitor_mount_halved_vertical.stl + 2 support_bracket_horizontal.stl) - If you're printing the quartered pieces, print 2x monitor_mount_quartered.stl and 2x monitor_mount_quartered_mirror.stl. You may also want to print 2x support_bracket_vertical.stl to help stabilize the monitor (might also work well without... let me know!) If you're printing on a Prusa MK3/S, you should be able to open the included 3mf files in Prusa Slicer: - The 3mf_monitor_mount_quartered.3mf file has all four quartered pieces arranged neatly on the plate so they can be done in a single print. - The support_bracket 3mf files each contain a pair of support brackets for the named axis. - Don't forget to double-check your settings when using a 3mf file! (nozzle size, infill settings, etc.)