Remington Dog Crate Clip

prusaprinters

<p>I bought a Remington dog crate at a garage sale. Unfortunately, some of the clips that hold it together were missing, so I printed my own. Based on my measurements compared to the measurements posted on Walmart's website, I believe I have the "medium" sized crate. I am not sure if these clips are interchangeable between the different sizes, or if they work with other models.</p> <p>I take no responsibility for any harm that may come to you or your pet through use or misuse of this part.</p> <p>UPDATE May 2nd, 2020: I have modified this part to look more like the original, and added some fillets so it looks a bit nicer. I've included a photo that shows the original part (top) compared to version 1 (middle - green), and version 2 (bottom - black)</p> <p>If this design was useful to you, consider a tip or post a make!</p> <h3>Print instructions</h3><h3>Print Settings</h3> <p><strong>Printer Brand:</strong> Anycubic<br/> <strong>Printer:</strong> All-metal Mega<br/> <strong>Rafts:</strong> Doesn't Matter<br/> <strong>Supports:</strong> Yes<br/> <strong>Resolution:</strong> 0.2<br/> <strong>Infill:</strong> Gyroid 50%<br/> <strong>Filament:</strong> ABS</p> <p>This needs to be as strong as possible (if you like your pet). I suggest you leave it in the orientation I've put it in unless you have a good understanding of how orientation of layers affects strength.</p> <p>I printed it with 6 shells and 50% gyroid infill. Used supports and a brim.</p> <p>I also suggest you print it in a high temperature material (not PLA) so it doesn't soften or warp in the sun.</p>