Reloading Cartridge Trays

thingiverse

Here are trays that will cover holding any caliber from 32 ACP through 45-70. Each one holds 50 pieces and the holes all have a .750 inch spacing between centers. The overall sizes vary based on the diameter of the cylinders, but they're all around .44 inches x 3.75 inches x 7.5 inches. All floors and walls are 1mm thick. Using Inland PLA @ $18 per kg shipped from Amazon, these trays end up costing $1.25 each and take about 2.5 hours at 55mm/s. The 5.56 tray will work for 300blk, 32 ACP, 380 ACP, 9mm, and other similar cartridges. The 357 mag tray will work for 38 spl, 40 s&w, 10mm, and other similar cartridges. The 7.62x51 tray will work for 45 ACP, 30-06, and other similar cartridges. The 300 WM tray will work for all belted magnums like the 7 mag and 338 WM. The 45-70 tray should fit just about anything as it is massive. Print Settings Printer Brand: SeeMeCNC Printer: Rostock MAX Rafts: No Supports: No Resolution: .25mm Infill: 0% Notes: I used a .5mm nozzle and did one perim pass, two top and bottom solid layers, and 0% infill.