Rehoboam (Westworld S3)

thingiverse

After some interest, I'm uploading my Rehoboam model that I created after watching Westworld S3. I didn't initially plan on posting it here, so here are some tips and info on how I printed it to get the end results shown. I understand that everyone's printer will be a bit different, and people might use very different print settings, etc. But in my case, I managed to avoid using supports for the overhangs when printing the model in its natural up position. On the bottom part of the model, I basically only added some extra support on the very center so it has a more sturdy base and doesn't tip over. However, you might want to use supports if you feel like the overhangs might be an issue for your printer, etc. For the top part of the model, you can see the image in the gallery on how it's best to print it. I've also posted a link to a YouTube clip that shows the printing process: https://www.youtube.com/watch?v=kEEY1Lp5mOA The files I'm sharing are an updated version of the original two-piece print, which has been tweaked slightly to add extra thickness to the top 2-3 rows. This should help prevent any issues with printers that don't like thinness. When assembling the model, simply glue the pieces together - it's a fairly straightforward process. For the lights, I used WS2812B LED rings and connected them using ESP32/ESP8266 with WLED firmware (https://github.com/Aircoookie/WLED). The firmware has a function called segments that allows you to split up the LEDs into sections to create different effects. I applied one of the existing effects to mimic running lights. The parts used are: * WS2812B LED rings * ESP32/ESP8266 with WLED firmware (https://github.com/Aircoookie/WLED) * 1mm and 0.75mm optic fiber cable * Some 3D printer PTFE tube to gluegun to the LED rings I've also posted some extra info and pics on Instagram: https://www.instagram.com/p/B_Nwg3kj5dx/