reel stand for 3D printer

cults3d

Reel Support Adaptations Now Available The reel support has been specifically designed to work seamlessly with Ender 3 and Geeetech A10/20M printers, but you can easily adapt it to fit almost any printer. To make this happen, you'll need to install a 10mm diameter pin, also known as a threaded rod. To assemble the reel support, you'll need to print several parts and purchase others. Here's what you'll need: Parts to Print: A specific set of washers A bearing tube Parts to Buy: Bearings Threaded stem Nuts Tube (coil support) Assembly Instructions: 1. Insert two bearings at the ends of the tube and slide the threaded rod through it. 2. Place the "0" washers on both sides of the tube before attaching the nuts. 3. Fit the shim washer, Washer 01, into the original coil holder. 4. Attach a nut to the other side of the metal coil holder using the "Washer 02" termination washer. Printer Requirements: 1. Tube 2. Set of washers (includes Washer 01, Washer 02, and 2 x Washer 0) Parts to Purchase: A. Ball bearings - Amazon: https://www.amazon.com/gp/product/B07PPY9N7R/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&psc=1 B. M10 threaded rod (approximately 14cm for a support) C. Nut for the threaded rod (self-locking devices recommended)