Reef-Pi Server and Pump Enclosure

thingiverse

This is an enclosure for my Reef-Pi Build, located at https://reef-pi.github.io/. The enclosure is divided into four sections to fit onto my MP Select Mini Printer and requires gluing together two top pieces and two bottom pieces after they are slotted. There are two options available: * Use the first four files to create a box with feet for the Raspberry Pi and holes for two 12v peristaltic pump motors. * Use the last four files to create a box with feet for * a Raspberry Pi, * a L298N (pump controller), * a PCA9685 board (lighting controller + pumps), * a 20mm x 80mm circuit board (input power circuits for lighting and pumps), * space for two 12v pump motors, * additional vent holes to enhance cooling. Another option is available to replace the pumps with eight 5.2mm plug connectors instead. I utilized the build guide from the Reef-Pi Build Guide at https://reef-pi.github.io/build-guides/lighting/ and the fritzing diagram from the Hackster 4 Wheel Drive car located at https://www.hackster.io/RedMnMGuy/4-wheel-drive-dc-motor-control-for-raspberry-pi-1300c4 to set up the pumps. Note: I cut and drilled holes for additional lighting and power outlets because their locations were uncertain, but it would be more efficient to integrate them into future designs.