Redesigned K8200/3Drag V2, Build volume 200x200x300 mm
thingiverse
Human: (V3 http://www.thingiverse.com/thing:769805) (V1 http://www.thingiverse.com/thing:764262) Didn't like the original x-carriage. Won't have time to print and test everything for a while, so parts may not hold; therefore, it remains as work in progress. Added a screw mount for the endstop on the x-carriage by eMotion-Tech (http://www.thingiverse.com/thing:119616/#remixes) for Prusa i3 Rework - one for T5 belts and another for GT2 belts. The 625 bearing for the X-belt and Y-belt requires a small M5 washer on each side, followed by one large M5 washer per side, in this order: (large washer - small washer - bearing - small washer - large washer) More washers may be needed between the bearing clamp X, Y belt holder STL, and printbed lower carriage. Used longer bearings instead - bearing clamp x (bearing clamp x longer STL) and y belt holder (y belt holder longer STL). You will need: A K8200 or 3Drag and extra screws, nuts, and washers (M3, M4, M5, M8). An M8 threaded rod about 50 cm to reach a 300mm Z-axis length. Zip ties are required as well. Optional, but recommended, are springs for backlash on the z-holder-endstop STL and z-holder STL - two sets of each. A Nema 17 stepper motor will also come in handy. An additional M8 threaded rod may be necessary. GT2 belts and pulleys complete this list.
With this file you will be able to print Redesigned K8200/3Drag V2, Build volume 200x200x300 mm with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Redesigned K8200/3Drag V2, Build volume 200x200x300 mm.