Redcat Gen 8 Center Skid Plate Lock Nut Block

thingiverse

This block fills the void in the center skid plate for the Redcat Gen 8 International Harvester Scout II scale crawler to keep the rear upper link screws firmly in place without using lock nuts. The factory uses these nuts to prevent loosening due to molding process voids, but this block eliminates that need. Additional hardware required: 2pcs: M3x25mm button head To install, remove both upper and lower link screws and set them aside to access the links. Insert the block from the bottom of the skid plate into the empty space, then reinstall the links and screws. For best results, use M3x25mm screws that go directly into the lock nut block. Redcat parts on Thingiverse are released under the Creative Commons License Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0). We want to share these parts with everyone and encourage people to make their own custom parts for their vehicles. According to this license, if you produce this part (Gen 8 Center Skid Plate Lock Nut Block.STL) for others, you cannot charge more than $0.50 per part plus shipping costs. This estimate is based on average material and machine running costs.