Rear Z Braces for Any CR-10 Style Printer

prusaprinters

<p>!!!MUST BE MIRRORED IN YOUR SLICER TO PRINT BOTH SIDES!!!</p> <p>I designed this to replace the old one I had. Since the pipes sat in-line with the frame itself, the cable chain was rubbing into it constantly and it didn't give anything that much space to move around. This bolts to the side of the frame, so it achieves a lighter footprint while being just as sturdy as any other brace. If you have any issues with the parts, please let me know and I'll try my best to fix it!</p> <p>P.S. You will need to remove the bearing blocks at the top of the lead screws (if you have them), since the top half needs to be screwed in at that location!</p> <p>Hardware needed:</p> <p>1/2" Aluminum pipe, ~20" length for each side for the SV01, be sure to measure if you have a different printer.</p> <p>x4 M3x10 Screws</p> <p>x4 M3 Hex Nuts</p> <p>x12 M5x12 Screws</p> <p>x12 M5 T-Slot Nuts</p> <p>Can be printed in PETG, ABS, and Nylon. PLA might not be rigid enough.</p> <h3>Print Settings</h3> <p><strong>Printer:</strong></p> <p>Sovol SV01</p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>Doesn't Matter</p></div> <p><strong>Supports:</strong></p> <p>Yes</p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.2mm</p></div> <p><strong>Infill:</strong></p> <p>30%</p> <p><strong>Filament:</strong></p> Duramic 3D PETG <p>Transparent</p> </p></p> Category: 3D Printer Accessories