Rear mudguard and footrest for Dualtron

prusaprinters

<p>Compatible with Ultra, Thunder, DT3, Compact, DT2, Raptor 1, Victor.</p><p><strong>Semi-flexible rear mudguard&nbsp;</strong></p><p>Comes in 2 parts:</p><ul><li>Mudguard</li><li>Bottom support</li></ul><p>And 1 optional top plate if you don't have anything to secure the mudguard in place.</p><p>The mudguard should be printed in TPU (A98) in order to remain flexible but also to keep its shape. You can (like in the picture) shape it with a heatgun &nbsp;for a better fit.</p><p>The bottom support only purpose is to give a rounded shape to the mudguard and can be printed either in PLA, ASA, ABS or PETG.</p><p><strong>Foot rest</strong>&nbsp;</p><p>Three versions with angles at 30°, 20° and 20° with flat top-surface and larger holes for the &nbsp;screws on the back (if you want to add washers).</p><p>Print orientation: preferably upside down, with supports.</p><p>Material: ABS or ASA if you plan on carrying the scooter with it. Otherwise, PETG or even PLA are fine.</p><p>Print settings: 3 perimeters 20% up to 30% cubic. You can reinforce the surfaces around the screws with cylinder-shaped modifiers at 100% infill.</p><p>&nbsp;</p><p><strong>Note</strong></p><p>If you use both the footrest and the mudguard, you may have to use longer screws because of the extra width.</p>