Reach3D prusa inspired hot end with cooling fan

prusaprinters

<p>This hot end configuration was inspired by a prusa direct drive modification project with the Reach 3D Collaboration community. These parts were modeled from scratch using Fusion 360 and have been tested. As of right now there are only parts for an E3Dv6 hot end with BL touch and a 30mm fan. I will be working on another version for the stock j head that comes with the reach, but as of today they are not yet finished. Please feel free to remix and share with the community!!!</p> <p>This build is made with very tight tolerances and everything is a tight package in an effort to minimize any loss of print area. Please make sure your printer is calibrated properly before printing this or you may have issues with clearance on the BL Touch or fan duct.</p> <p>I have also included a prox sensor mount for those who don't have a BL Touch.</p> <p><strong>**</strong> I have not tested this mount on my printer as I have not used the prox sensor for quite some time.<strong>*</strong> If you find an issue please let me know and i'll do my best to make corrections as fast as possible.</p> <p>BOM:<br/> You may already have some of these from the Reach3d kit:<br/> 2 M3x25 bolts<br/> 2 M3x20 bolts<br/> 2 M5x25 bolts<br/> 1 M5x30 bolt<br/> 4 M3x12 bolts</p> <p>For the Bl touch<br/> 2 M3x6 bolts</p> <p>1 30 mm fan<br/> 1 50 mm radial fan</p> <h3>Print instructions</h3><h3>Category: 3D Printer Parts Print Settings</h3> <p><strong>Printer:</strong> Reach 3D</p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> .3</p> <p><strong>Infill:</strong> 30%</p>