RC6 Decoupler

thingiverse

==== THIS IS BETA VERION, MAY NOT FIT PROPERLY ====Decoupler for GSO RC to reduce drag on mirror cell. Usable for heavy load image train. Prevents decollimation when telescope position change.Steps to install:1) dissasemble back plate and remove primary mirror;2) reset primary mirror collimation screws;3) put centering cap;4) put decoupler on centering cap;5) rotate decopuler, untill You see all collimation screws through holes;6) drill 5,5mm diameter holes for screws via decouplers screw holes;7) remove decoupler and centering cap;8) thread the holes for M6x1;9) screw the decoupler with 3x M6x1 screw;Optionally You can drill 6mm holes and use washer and nut from inside.You can also optionally laser-cut washer for decoupler from 1mm eva foam or similar product.10) reassemble primary mirror and back plate;11) collimate the telescope;The prototype seems solid and holds tight, but use it at your own risk. I take no responsibility for any possible damage.