RC Yamaha Sr Viper 1/6 Modding Parts

RC Yamaha Sr Viper 1/6 Modding Parts

thingiverse

You need a "Kidztech 1/6 Yamaha" or "TopMAZ 1/6 Yamaha". You have to cut parts of it and add hobby grade electronics for this to work. This is not a complete model. These days the color has changed, but the base remains the same. There is an orange/blue, a red/black, and a grey/black Kidztech model now. They all work for these mods. If you need a replacement bulkhead that will fit without any mods, see here: https://www.thingiverse.com/thing:3265111 ============================================================ UPDATES APRIL 2019 Pascal made his files available for the Polaris: https://www.thingiverse.com/thing:3581090 THANK YOU PASCAL!! Dec. 2019 I made a Power Claw track remix. The paddles are 2mm shorter than Pascal's original track for more tunnel clearance. This will be more suitable for a Yamaha / Arctic Cat sled since they come with them from the factory. Feb. 2020 I posted a simple gearbox in the remix tab, for use with 540 and 380 motors. https://www.thingiverse.com/thing:4183647 March 2nd 2020 I posted a front sprocket with FAT teeth, less chance of breaking them. (Thanks J.D.!) Also check out the REMIX page for more accessories! https://www.thingiverse.com/thing:3432547/remixes March 18 2020 I added some scale lower and upper A-arms. Looks nicer and has better shock angle. Scale_Upper_Aarm_Left.stl Scale_Lower_Aarm_Left.stl (Mirror the files in your slicer to get the right side) ============================================================ Required Printed Parts: * You need 36x individual track parts to make a complete track. * The rod-end I use are Traxxas TRA1942. * The front shocks I use are RC4WD Shocks 80mm w/ internal springs, 10mm diameter. * All the bolts and nuts are M3, mostly M3x16 but some M3x12 and M3x20. * You will also need a 3mm steel rod, long enough to cut and make axles for the front and rear upper skid mounts and a way to keep them there (set-screw collars). You could also use some long M3 all-thread rods cut to length and some nuts. ============================================================ Notes: * With "promod_bigshock_upper_Aarm" you should be able to fit up to 15mm diameter shocks! * Use "promod_bulkhead_higher_shock_mount" for longer shocks (Should help fit shocks up to 90mm or 100mm with limiters)! * To fit the long track conversion, you will need to remove the factory On/Off switch from under the seat and grind the white plastic hump underneath flat, or your track will rub on it.

Download Model from thingiverse

With this file you will be able to print RC Yamaha Sr Viper 1/6 Modding Parts with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on RC Yamaha Sr Viper 1/6 Modding Parts.