RC Wheel Adapter for Robomow

thingiverse

Hey, this is a remix of the Robomow Adapter for 1/5 RC Wheels by toggec. Since my RS 635 Pro kept throwing off the original adapter when using the clip, I decided to alter the design a bit. This might be due my rather rough terrain or the higher torque output from the RS 635 motors or maybe both. This adapter is using three M4x8 grub screws to keep the adapter on the drive shaft. The adapter itself fits very tight and needs some slight persuasion via a hammer to slide on the shaft. It would still however slip off on rough ground, the screws will prevent that. After printing, I cut M4 threads into the three holes on the side using a thread cutter. To attach the wheel to the adapter, I am using a M8x12,7 threaded insert, which was installed using a soldering iron. A M4x20 flat head screw connects the adapter and the wheel. Update 24.09.2020: Added another prototype "v2" which only needs one M4x8 grub screw to keep the adapter on the drive shaft. Parts list: Wheels: 1 set 1/5 RC Wheels, in my case I am using: Louise RC X-CYCLONE MFT Technology TRAXXAS X-MAXX 1:5 6x M4x8 grub screws: https://www.amazon.de/gp/product/B071X59S84/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 2x M8x12,7 threaded inserts: https://www.amazon.de/gp/product/B085X28168/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 2x M8x20 screws: https://www.amazon.de/gp/product/B0793MRS8Q/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1