RC Wall Mount - Command Strip Compatible

prusaprinters

I really liked the idea of the wall mounts I remixed from, but I can't drill into my walls in this old house. So Command Strips are the solution! I designed these parts with an inset so that they sit flush against the wall while also being securely held by command strips. All the adapters also have 2 screw holes built in to screw-mount later on if you desire. The transmitter hook has a 7.5* angle on the back in order to help prevent the transmitter sliding off. There is also a step file for this if you want to emboss it. Any embossing that cuts away from the face should be ~1.5mm deep,. There is 3mm of material between the front face and the the inset location for the command strip. The 1-24 scale is designed with small command strips in mind. (Unsure of part number off-hand). The 1-24 scale hook has an adapter to sit between the hook and the wall if you plant to use screw-mounts. All other sizes are designed to use Command Strip Part Number 17206 (16Lb / 7,2kg) strips. Note that this payload rating they use refers to the weight limit when using 4 pairs of strips. (each pair has a 4lb payload). As such, the parts are designed as follows: 1-24 scale + 1.9" wheel mounts = 1 strip per hook 2.2" wheel mount hook = 2 strips per hook 3.8" wheel mount hook = 3 strips per hook The inset is approx 2.9 - 3mm deep, which sits the command strip's adhesive pretty much flush to the wall-touching side of the hook when the command-strips are interlocked. I have had my Traxxas Summit 1/16 and my 9lb Axial Yeti hanging from their respective hooks for about 2 weeks now without any issues. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.28mm Infill: 5-15% depending on your strength preference Filament: Hatchbox PLA Black Notes: Printing the 3.8" hanger took most of the bed up, and each print takes approx 15hours using these settings @ 60mm/s. Approx 9 hours for the 2.2" wall hook.. 4 hours for the 1.9" wall hook. <2 hours for the 1-24 scale hook. Custom Section Large Command Strip Link (Labeled as 16lbs) https://www.command.com/3M/en_US/command/products/~/Command-Large-Picture-Hanging-Strips-17206-12ES/?N=5924736+3291751934+3294529207&preselect=8706801+3293786499&rt=rud Note that to get the 16lb payload, you need to have 4 sets of strips. Meaning 4 attached to the wall, and 4 item being mounted. Category: R/C Vehicles