RC Torro Sturmtiger Speaker Box

thingiverse

I designed a speaker box to fit inside my 1/16th Torro Sturmtiger Tank, replacing the original one supplied. The box has two halves that need to be glued together using automotive bumper repair epoxy glue. It is specifically designed to accommodate a Visaton FRS 8 Ohm 3.3 Inch speaker. To fit it perfectly in place, the box is shaped like an L, allowing a TARR Smoke Unit to sit next to it at the rear of the tank. Unfortunately, I am unsure if the original Heng Long style smoke generator will fit in the gap since I have already disposed of it for the TARR unit. The speaker box sits just behind the on-off switch bracket and requires three small holes to be drilled into the hull sides above the tracks for secure positioning. To make room for the speaker, the top hull section needs to be modified by moving the Daughter circuit board and trimming the mounting screw lugs flush with the hull to avoid any obstruction. The Visaton FRS 8 Ohm 3.3 Inch speaker is available on eBay at https://www.ebay.co.uk/itm/Visaton-FRS-8-OHM-3-3-Inch-High-Power-Fullrange-Speaker/132106418388?_trksid=p2485497.m4902.l9144 The TARR Smoke Unit I have fitted can be found at https://www.rctankelectronics.com/store/p34/TARR_Smoke_Unit.html