RC Tank Pan Tilt FPV Camera Mount for Cover or Turret Platform

thingiverse

This design is intended for use with the Spotter V2 FPV camera, but it could be adapted for other models. There are two options available for mounting this design to a tank. Option 1: Mount to RC Tank Turret To implement Option 1, you will need to utilize the following files: - Base_For_Turret - Cam_Mount This option requires one micro servo, which should be mounted into the base with its gear facing towards the rear. You can center the micro servo gear using your controller or a tester. Next, mount the camera platform at an angle slightly upwards. There is more rotational room available by tilting up than there is by tilting down. Option 2: Replace Top Cover Bracket To implement Option 2, you will need to use the following files: - Cover_Bracket - Base_For_Cover - Cam_Mount This option requires two micro servos. If you are using Staind's cover, you can replace the top cover bracket with this design. To assemble Option 2, center both micro servo gears using your controller or a tester. Mount the base servo so that its gear is centered on the cover bracket. The platform will then be mounted in a manner similar to Option 1 above. For more detailed information and guidance, please refer to the following YouTube videos: https://youtu.be/yOUOtnTeT50 https://youtu.be/9B1W6Q2m8vA