RC Setup Board Leveling Tool

thingiverse

# RC Setup Board Leveling Tool ## History I recently attended a 2WD-Buggy Off-Road-Race. While doing setup on my car I thought leveling the board with a cooler tool than a clearance-gauge would be nice. ## Purpose Leveling your setup board. ## Printing I used PLA+ and no support. ## Addionally needed parts * 8 x M3 nuts * 4 x M3 8mm set-screws[1] * 4 x M3 16mm or 20mm set-screws[1] ## Assembly * Print the parts according to your board thickness (adjust if necessary, it's OpenSCAD, so Customizer should work) * Fetch above mentioned hardware * Insert the nuts into the slots (I used a vise to press 'em in) * Insert the set-screws * Attach the B-Part (foot) ## Usage * Mount them on your board, careful while fastening so the board doesn't get damaged * Use a circular spirit level to monitor your adjustment results * Adjust level ## Footnotes [1] ordinary screws will also do, but have two disadvantages: 1. Will be in the way; 2. Range limited since head must stay "out") #EOF