RC Servo mounting frame PS-1171MG

thingiverse

A basic wing servo mounting frame for the PS-1171MG servo from Banggood.http://www.banggood.com/JX-Servo-PS-1171MG-17g-3_5kg-Torque-Metal-Gear-Analog-Servo-for-RC-Models-p-1013369.html Servo casing dimensions are 30x12mm. The distance between the servo bottom and mounting tab bottom is 20mm. Including mounting tabs, the width is 40.5mm. Speed (4.8V): 0.13sec / 60 ° Speed (6V): 0.11 sec / 60 ° Torque (4.8V) reaches 3.0kg.cm or 42 oz/in. Torque (6V) reaches 3.5 kg.cm or 49 oz/in. The weight is 17.5g. Other servos that seem to be identical in size are Aerostar AS-170MG, POWER HD HD1711MG, and PLA. A nozzle of 0.4mm is used with a frame layer height of 0.2mm and mounting tab layer height of 0.1mm. Infill is set at 100%. The screws that come with the servo are used to secure the servo to the mounting frame. A single set includes one frame and two mounting tabs. First, print a prototype. My frame needed to be scaled by 3% for correct inner dimensions despite good 3D printer calibration settings. Printer: PRNTQB V2 No rafts were printed. Supports were not used in printing. Resolution was set at 0.2mm / 0.1mm. Infill was set at 100%.