RC Plane Propeller | Three blade | BF109 G10 | 14x8" | Thrust tested |

cults3d

Three-bladed Messerschmitt BF109 G10 Propeller and Spinner. 14-inch diameter, 8-inch pitch. 6mm prop shaft diameter. Propeller is a four-piece construction consisting of three blades and a hub. The spinner is a two-piece unit (spinner and mounting plate). Thrust testing was successfully conducted with the Turnigy Aerodrive SK3 - 4250-500KV Brushless Outrunner Motor. With a 4S battery, it produced 2.3 kilograms of thrust at peak discharge and is capable of over 30,000 RPM. I have a video of the thrust testing and will upload it shortly. WARNING Three-dimensional printed props can be extremely hazardous if unbalanced or printed incorrectly. Print the blades horizontally to ensure the prop is strong enough; otherwise, it may shatter. It's highly recommended that you balance the prop before use to reduce vibrations. Always thoroughly test the prop before flight and take necessary precautions (eye protection and stay well back). Disclaimer McKDesigns assumes no responsibility for any damage or injury to property or persons caused by the use of this item.