RC Paraglider Harness-Pilot

thingiverse

**This project is still in progress. This is a first version that isn't flew yet.** More information soon... Details: ->Motor: Designed for Turnigy D3548/4 1100kv Has holes for mounting 16x19mm ou 19x25mm motors. ->Servos: Designed for standard size servo. ->Hanging points: Designed to use M3 screws with a nut inside the square hole on top. After first assembly the nut can be glued. --------------------------//------------------------------- PRINTING INFO: Material: PLA Premium Brand: Voolt3D Printer: Ender 3-V2 01-print: Infill: 40% Wall Thickness: 1.6 mm Layer Height: 0.2 mm Bed Temp: 70°C Nozzle Temp: 210°C 02-print: Infill: 30% Wall Thickness: 1.6 mm Layer Height: 0.2 mm Bed Temp: 70°C Nozzle Temp: 210°C 03-print: Infill: 10% Wall Thickness: 1.6 mm Layer Height: 0.2 mm Bed Temp: 70°C Nozzle Temp: 210°C 04-print: Infill: 10% Wall Thickness: 1.6 mm Layer Height: 0.2 mm Bed Temp: 70°C Nozzle Temp: 210°C 05-print: Infill: 05% Wall Thickness: 1.6 mm Layer Height: 0.2 mm Bed Temp: 70°C Nozzle Temp: 210°C 06-print: Infill: 10% Wall Thickness: 1.6 mm Layer Height: 0.2 mm Bed Temp: 70°C Nozzle Temp: 210°C 07-print: Infill: 30% Wall Thickness: 1.6 mm Layer Height: 0.2 mm Bed Temp: 70°C Nozzle Temp: 210°C 08-print: Infill: 30% Wall Thickness: 1.6 mm Layer Height: 0.2 mm Bed Temp: 70°C Nozzle Temp: 210°C 09-print: Infill: 15% Wall Thickness: 1.6 mm Layer Height: 0.2 mm Bed Temp: 70°C Nozzle Temp: 210°C