RC M-1083 MTV 6x6 5-Ton Cargo Truck

cults3d

This is an RC model based on the US Army's M-1083 cargo truck from the FMTV family. It is 6 wheel drive and has flexible filament tires. It is ~1:22 scale, and matches my HMMWV https://www.thingiverse.com/thing:4711890. It can handle around .75" of soft snow or more if it is packed. It's pretty capable off-road for its size. And of course, if you find it can't drive somewhere it can almost definitely use its winch to get there. The .stl of the entire vehicle is not to be printed, but is to serve as a guide for assembling the model. If you try to print it it will not come out well, but it shows all of the parts in the proper positions. To build this you will need: A receiver with at least three channels (or two if you don't care about the winch) A 30 Amp ESC, or several, honestly I'm using an 80A one because I had it, but that's way overkill 6 gear motors from amazon (search "Greartisan DC 6V 150RPM N20 High Torque Speed Reduction Motor with Metal Gearbox Motor for DIY RC Toys") pick the ratio you want, the come in various gearings 1 9g servo M2 and M3 screws Superglue Paperclips or other suitable wire 12 of those little mounting screws that 9g servos come with A 9g continuous rotation servo if you want the winch PRINT: 2x MTV_LEAF_SPRING.stl 6x MTV_TIRE.stl 6x MTV_INNER_HUB.stl 6x MTV_OUTER_HUB.stl 3x MTV_C-CHANNEL.stl 1x Everything else If you want more specific build instructions on any part of the process as always I'd be happy to oblige.