RC FJ-4 Fury EDF jet

thingiverse

FJ-4 Fury EDF jet (V4.1) Recommended for LW-PLA but can be done in normal PLA 810mm span, 750mm length Empty: ~400g in LW-PLA / ~580g PLA (without the servo, EDF, ESC, Rx & Battery) AUW: ~800g / ~1000g 64mm EDF use; https://www.aliexpress.com/item/32851049476.html 2400KV version Recommend 4S 1800 battery Late UPDATE 4.1 - Added through cooling holes for Canopy Nose piece Version 4 Changes (APRIL 2022) - Added new Nose with cooling inlet holes - Added catapult hook point in nose - Added alignment pin holes for all fuseluge and inner wing - Added strength brace for canopy - Added strengthing ribs for main deck under canopy - Further improved for SPIRAL / VASE mode printing Version 3. Previous versions (as seen in a few YT videos) were with normal PLA tests/had longer nose / elevator servo differnt location / didnt look as nice as V3. https://www.youtube.com/watch?v=Lom4fUXdlYE Yes, its FAST! SEE PICTURES for print and assembly tips. - BLUE Arrows indicate recommended printing direction - SINGLE WALL printing, except for EDF/Fan upper & lower with 2 walls - Typically NO support / NO infill / 2 or 3 layers top and bottom - Most pieces can be printed SPIRAL / VASE mode Materials beyond the obvious; 500mm x 8mm Carbon Tube (Wing spar) 140mm x 4mm carbon Rod (Elevator spar) Short bits of Spring wire or Carbon rod just under 2mm for Aileron hinges 3x 9g Servos (suggest HXT900) some 4mm wood dowel for alignment RCGroups for more info https://www.rcgroups.com/forums/showthread.php?3726749-FJ-4-Fury-semi-scale-EDF