RC Carbon Cub

prusaprinters

<p>To design a 3d printable rc plane was a challenge I had put to myself. What better choice than my personal favorite bush plane?</p> <p>Wingspan 1m, neutral point is around 55mm from LE.</p> <p>I'm using a Sunnysky x2216 1200kv motor (mounting holes 16x19), 8x6 prop, 1300 3S, and 25A ESC</p> <p>There are two options for the wing. Either an 8mm spar 800mm long can be used, or one thats 120mm along with filament strings connected to the fuse with lugs.</p> <p>RTF weight with battery as tested is 685gm.</p> <p>Would suggest printing all parts aft of the wing at 90% flow</p> <p>Will upload flight video soon</p> <p>STEP on grabcad/library/rc-carbon-cub-1</p> <h3>Print Settings</h3> <p><strong>Printer:</strong></p> <p>FLSUN Kossel</p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div> <p><strong>Supports:</strong></p> <p>No</p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.2-0.24</p></div> <p><strong>Infill:</strong></p> <p>100</p> <p><strong>Filament:</strong></p> - PLA <ul> <li></li> </ul> <p><br/> <p class="detail-setting notes"><strong>Notes: </strong></p> </p><div><p>For all parts,<br/> 1 wall line <p>1 top/bottom layer</p> <p>Most of the model won't be affected to infill settings. Do ensure though to print Fuselage 2, and Wing 2s with 100% infill to strengthen the places where screws are screwed lol.</p> <p>Fuselage 1 (would recommend printing out of ABS or reinforcing with cyano) needs supports for the air intakes.</p> <p>Might want to use a brim on thin parts like the ailerons</p> </p></div></p></p> Category: R/C Vehicles