RC Car Storage/Display Hook

pinshape

UPDATE: 17 NOV 2019 - Added a 12mm loose fitting hex to one side. Make sure you mirror the hanger in your slicer for the left/Right Hook or use the provided mirrored STL. These wire squares are similar to the style used here. You'll need to zip tie them together then fasten them to the wall with some screws and a spacer to lift them at least 1/2in off the wall for the hook to slip over the wire frame. Get grid-wire-cube-shelves-1 from evansmarket.com/products/grid-wire-cube-shelves-1?variant=30986312319030&utm_medium=cpc&utm_source=google&utm_campaign=Google%20Shopping. This design repurposes interlocking wire cubes as an RC wall rack. These hooks fit over the axle stub on any 1/10th scale or smaller rear axle stub and hex. To install, insert the axle stub then finger tighten the axle nut. Attach one on each side, hang and enjoy. The wire cubes need at least 6mm of space between them and the wall behind to hook and unhook the hanger. I recommend using 1"x2" furring strips painted and attached to the wall then attaching the wire cubes with drywall screws and large washers. Tip: Zip Tie the top row while you mount them, then zip tie subsequent rows together until you have securely anchored each square.