RC Car stand foldable

thingiverse

Wanted a foldable car stand, which could also serve as a shock-stand for different cars, shocks, ... I drive an Xray XB8, XT8 and XT2 ... but this car-stand will suit ANY 1/8th or 1/10th buggy. I might need to make it a bit higher to suit Truggies better. WORK IN PROGRESS ! But allready "very" usable as is. You will need some long m3-rods as the axles between the top and legs. You might use an m3-reamer to open up the axle-holes if they are not printed perfectly open or round. A drill-bit will do as well. Dimentions about 10 cm wide, 9 cm high, 18 cm long. The shock-holes will suit for 1/8th and 1/10th buggies *** Will be worked on: * might make the top a bit wider * will improve alignment legs * will improve the support-brackets. They tend to get loose * will widen the axles-holes as it is a good but tight fit now. * considering to make the car-stand higher to suit better with 18th truggies.