Razor cover for Gilette skinguard sensitive

prusaprinters

<p>I find the original transparent cover particularly useful when traveling.<br>I needed an extra one, so I took some measurements from the original little cover and I made a similar one.<br>I have used this piece for more than a year and it's still holding just fine, even the clips are working flawlessly.<br>I designed this model to work with Gilette Skinguard Sensitive blades, I don't know if it works even with other models, it would be cool.</p><p>I hope you'll find this model useful, and please post your makes! :D<br><br><br><strong>Printing Instructions:</strong><br>The model should be printed with the round holes facing the build plate so that no supports are needed.<br>I sliced the model in PrusaSlicer with 4 perimeters and 5 top/bottom layers, there's practically no infill, which by the way I set to 20%.<br>I set the layer height to 0.2 mm, but I used adaptive layer height to make the little tab more detailed (it's at about 7 mm of height).<br>The tolerances in the model are quite small, but I found out that printing it at about 40 mm/s gives a nice result that slides in just like it should.<br>The filament I used in the photos is Sunlu's transparent PLA+.</p>