Razor blade spatula

thingiverse

A handy tool to remove print from build blade, even on FDM or SLA. You just have to gently slide it under the print and work your way till the print is off. I've used M3 threaded insert and a small screw from a computer, but you can use M3 screw and nut (the hole is Ø3.6mm), the shorter, the better, to be as close as possible from the built plate. A practical tool for removing prints, just as well in FDM as in SLA. Simply gently slide the cutter blade under the print and work on it until it comes loose. I used an M3 insert and a tiny PC screw so it wouldn't stick out too much. You can still use an M3 screw with nut (the hole is Ø3.6mm), but the shorter one will be better to get as close as possible to the build plate. Cutter blade of this type: https://www.amazon.com/Fiskars-Blades-Trizoid-Metal-Stainless/dp/B007C1VEGY/ref=sr_1_42?__mk_en_US=%C3%85M%C3%85%C5%BD%C3%95%C3%91&keywords=cutter+blade&qid=1568547954&s=gateway&sr=8-42