Razor Blade Scraper

pinshape

This is an easy-to-print and lightweight razor blade scraper that can be used to release prints from your print bed, scrape paint off tiles, etc. There are only two parts you need to print, with a combined print time of around 5 hours at a layer height of 0.1mm. Assembly requires a single M4 x 8mm bolt and an M4 nut. I recommend printing both parts at 100% for maximum sturdiness and non-flexing performance. Printing the blade holder at lower infill percentages is also possible, but it may compromise its rigidity. You can order the hardware and blade from the following links: mounting hardware, razor blades - Support. If you'd like to support me for publishing free designs, consider using my AliExpress Affiliate Link when making a purchase. It won't cost you anything extra, but it will help me out significantly.