Razor Blade Scraper

myminifactory

This is a simple to print and lightweight razor blade scraper, which can be used to release prints from your printbed, scrape paint of tiles, etc. There are only two parts you need to print, with a combined print time of around 5 hours (at 0.1mm layer height). Assembly requires a single M4 x 8mm bolt with M4 nut. I would recommend printing both parts at 100% (though you might get away printing the blade holder with lower infill percentage), as that makes it a very sturdy non-flexing scraper. You can order the hardware and blade from the following links (affiliate): Hardware, Blades Support If you want to support me for the designs I publish for free, please consider using my AliExpress Affiliate Link when buying something from AliExpress. It doesn't cost you anything extra, but helps me out a lot :)