RatRig V-Core 3 IEC Adapter remix

prusaprinters

<p>Quick remix of <a href="https://www.prusaprinters.org/prints/80030-rat-rig-v-core-3-iec-adapter-surface-mount">https://www.prusaprinters.org/prints/80030-rat-rig-v-core-3-iec-adapter-surface-mount</a> and <a href="https://www.prusaprinters.org/prints/82811-back-cover-for-iec-320-power-socket-ratrig">https://www.prusaprinters.org/prints/82811-back-cover-for-iec-320-power-socket-ratrig </a>to fit the iec-adapter I had ordered.</p><p>I added holes for the screws to the iec-adapter and redrew the back cover, becaues it was a bit to small for myiec-adapter.</p><p>I only used two of the four holes to mount the front plate to the 3030 extrusions.</p><p>Prints without supports.</p><p>Printed in PETG at layer height 0.2mm.</p><p>Hardware needed:</p><ul><li>M6 bolts and nuts for 3030 extrusion for the surface mount part, 4x</li><li>M3 bolts and nuts for screwing on the back cover, 4x M3x10 mm</li><li>M3 bolts and nuts for screwing on iec-adapter, 2x M3x10 mm</li></ul><p>&nbsp;</p>