Ratewing Nano Drak gopro8 face

thingiverse

I am used to flying with a Gopro camera and meaningfully, I wanted to buy a Mini Drak to transport the camera, but the MD cannot be bought at the moment, so the little brother Nano Drak was bought. The first thing I decided to do was create a mount for the Gopro 8 and the Mini Foxeer Toothless FPV camera. After many attempts at modeling the mount, I settled on this option, it is the most compact for transporting Gopro and mini fpv cameras, and also has the most streamlined design. If you want to use the Gopro on your ND, you need to install a 40 "wing and boomer. If you fly on a 28" wing, simply remove your Gopro and replace it with a plug. Fpv camera plug may require some modification with a file. In order to trim the nose of your ND evenly, you need to use sharp blades. For an even cut, I created a stencil that must be put on the nose, it does not need to be printed completely, it is enough to print the first 15 mm of the wide part and pull it over the nose, exactly to the point where the plastic cover of your battery compartment begins, so you can cut it straight excess foam. I used a 0.6mm nozzle for printing Layer height 0.15 / 0.20mm Number of perimeters 2/3 Tpu material For the strongest seal, I used flexible plastic, with which you can easily reach your Gopro, or simply push hard on the nose from below. You can glue the part with cyanoacrylate glue, before glue is applied, pull the camera fpv wires into the hole and do not apply glue around the harness. Also, in order to get to the center of gravity, you must use an elongated motor mount, a link to it will appear here soon. Links If my project is useful to you, you can thank me via https://www.paypal.com/paypalme/everlastkam/ Subscribe to Instagram https://www.instagram.com/oleg_valkov_fpv/ Facebook https://www.facebook.com/oleg.valkov.94/