Rat Rig V-Core 3 Open Front Mod

thingiverse

For this mod, you'll need: For all sizes: - The printed parts: They are already oriented in the way they're supposed to be printed. - 2x M6x18mm Cap Head screw to attach the front Idler printed parts - 4x M6 Nuts to attach the front idler printed parts to the metal idler brackets - 6x 3030 T-Cornerplates/Connectorplates to mount everything together - 30x M6x12mm screws - 30x M6 Hammer-Nuts/T-Nuts Size dependent: 4 longer extrusions that replace the original z-extrusions (510/610/710mm for the 300/400/500mm size printer). The new size is up to you - I replaced mine on a 400mm machine with 810mm to get 20cm of height for the top part of the printer. If you already own the stock printer kit as well as a saw and are able to do a straight cut, you can cut the y and x extrusions (below) from the spare stock corner extrusions you now own ;) 2 additional y-extrusions: - 300 mm printer: 505 mm - 400 mm printer: 605 mm - 500 mm printer: 705 mm 1 additional x-extrusion - 300 mm printer: 440 mm - 400 mm printer: 540 mm - 500 mm printer: 640 mm