RasPi Camera Mount for TAZ

thingiverse

This is a compilation of components that were used to install a Raspberry Pi camera module on my LulzBot TAZ 4 for use with OctoPi. The enclosure, holder, and arm are taken from Dvogonen's Camera Mounting System for Raspberry Pi: http://www.thingiverse.com/thing:536828 A single 20mm×20mm extrusion clip is 2020_Clip_1xM3_90grad.stl, sourced from e-nozzle's 2020 Misumi Cable Clips collection: http://www.thingiverse.com/thing:349692 No alterations have been made to the original STL models; this assembly consists of pre-existing STLs gathered for other TAZ owners who need an adjustable camera mount. View devzero's TAZ Raspberry Pi Camera Case & Mount. Instructions I suggest printing with PLA material. I built using black M3 Nylon fasteners from McMaster-Carr:93800A400 Hex Nut, 5.7 mm wide, 2.5 mm high96295A120 Cheesehead Slotted Machine Screw, 10 mm length96295A126 Cheesehead Slotted Machine Screw, 16 mm length96295A132 Cheesehead Slotted Machine Screw, 30 mm length Alternatively, grab two Pibow extender bolt sets from Pimoroni. Nylon screws are a plus because they can be quickly trimmed to desired length with flush-cutters after nut installation. I recommend purchasing the RPi Camera Wide-Angle Lens, which clamps over Dvogonen's enclosure perfectly—see attached photos.